cFos Broadband Connect is a high-performance Dial-Up driver for Internet Access with high bandwidth. While the driver shipped with Windows can only transfer up to 4.5 Mbyte/s (= 36 Mbit/s), cFos Broadband Connect sends with 50 Mbyte/s (= 400 Mbit/s).
Tested with Gigabit LAN, Pentium 4 (3GHz).
cFos Broadband Connect is designed for maximum throughput under minimum CPU load. This leaves your CPU power to the actual Internet applications, like media players, etc. At full speed cFos Broadband Connect needs only 3% CPU time.
cFos Broadband Connect supports all important PPPoE parameters. These can easily be configured with the phone number used for the Dial-Up connection. With Auto-Detect cFos Broadband Connect finds all Internet access points connected to your system.
cFos Broadband Connect can also accept incoming calls. Thereby you can setup your own PPPoE server. This also allows your own speed tests with Gigabit Ethernet cards.
cFos Broadband Connect allows multiple PPPoE sessions simultaneously. You can use any number of incoming and outgoing sessions. With the Service-Name' and "AC-Name" parameters you can restrict connections to certain services or access points.
cFos Broadband Connect supports NDIS 6 under Vista / Windows 7, thereby providing even more network performance.
cFos Broadband Connect and cFosSpeed: A perfect team. High-performance data transfer plus Traffic Shaping, i.e. maximum bandwidth and minimal Ping.
cFos Broadband Connect can only be used, if your computer uses a dial-up PPPoE connection to connect to the Internet. (NOT, if you use a router that realizes this connection (!!) In this case you should use cFosSpeed). As High-Performance dial-up the usage is especially reasonable with bandwidths above 4,5 Mbyte/s (= 36 Mbit/s). Compared to cFos/Professional, cFos Broadband connect has the advantage off using less CPU.
You can find a decision support page here.
parameters can appear in arbitrary order, e.g., d\aidx=x\serv=x\h=x\ac=x\to=x\tr=x\prio=x\vlan=x parameter: default: meaning: d any digits, ignored aidx=x -1 -1 = auto-detect, 0..n = PPPoE for network adapter x (adapter index as stored in the registry) serv=name service name string for outgoing calls h=1 or h=0 1 enables or disables use of host_unique tag (1 = enabled)) ac=name string, which can be used to limit the PPPoE negotiation to a certain AC. name must be a substring of the AC name to=x 2000 initial timeout for outgoing PPPoE: timeout in milliseconds for server answers tr=x 3 number of retries on timeout prio=x set the VLAN packet priority (value from 0-7) vlan=x VLAN ID
func_trace 0 logging level, 0=minimum, 1=all functions, except data transmission, 2=also log data transmission functions wan_lines 2 number of channels for incoming and outgoing connections; you need to restart the driver if you change this value (afterwards reboot; and where necessary adjust the DUN connections) allow_incoming_calls 0 1=allow incoming calls, 0=ignore incoming calls use_delayed_send 0 11=delayed send for stack problems under NDIS 6, 0=deactivated Some network adapters cause a BSOD due to a stack overflow. Then you should look for newer drivers for this adapter. If this doesn't help, set use_delayed_send to 1. dump_unknown_frames 1 1=dump unknown PPPoE Frames into the trace.txt, 0=deactivated in_service_name (empty) answer incoming calls only if the service name contains the substring specified by in_service_name. padr_timeout 2000 timeout in milliseconds. Specifies how long cFos Broadband Connect should wait for PADR during incoming calls. max_frame_size=x maximum frame size (MTU), default 1492